Adapter Base Not Unique

[hadiesper]

I understand that "Adapter Base" has to be unique among all drivers.

My problem occurs when putting together the following code:
<?xml version="1.0" encoding="utf-8" ?>
<mServerDb vendor="SHIFRA DRIVER" version="1.4.1">
<Protocols>
<protocol name="ShifraSWaveProtocol" saveLevel="false" canEnroll="true" forcedAddressList="true" automationCmdsDelay="100" />
</Protocols>
<Adapters>
<adapter base="ZWCTRL" load="Y" assembly="EA.Zwave.dll" driver="EmbeddedAutomation.mServer.Adapters.ZWaveManager">
<aparam name="DISPLAY-AS" value="Shifra SWave Adapter" />
<aparam name="Description" value="Shifra SWave Adapter" />
<aparam name="Supports" value="ShifraSWaveProtocol" />
<aparam name="Port" value="COM6" />
<aparam name="DebugLevel" value="5" />
<aparam name="PollingSeconds" value="5" />
</adapter>
</Adapters>

<Modules>
<module base="ZW_THERMOS" class="THERMOSTAT" use="Y">
<mparam name="DISPLAY-AS" value="S-Wave Thermostat" />
<mparam name="Description" value="S-Wave Thermostat" />
<mparam name="MProtocol" value="ShifraSWaveProtocol" />
<mparam name="FieldsGrp" value="ZWAVETHERMO" />
<mparam name="ParamsGrp" value="HVAC" />
<mparam name="DefaultImage" value="Thermostat.gif" />
<mparam name="HVACMODES" value="OFF|HEAT|COOL|AUTO" />
<mparam name="FANMODES" value="ON|AUTO" />
</module>
</Modules>

<ModuleCommands>
<group name="THERMOSTAT">
<command name="null" uiClass="Link" urlPage="HvacView.aspx" mcmlPage="" append2Link="devid" />
<command name="SetSPH" label="Heat setpoint" locID="MCMD_SPH" uiClass="">
<component label="Temp." locID="MCMP_TEMP" type="NUM" subType="double" values="-40~232" default="65" />
</command>
<command name="SetSPC" label="Cool setpoint" locID="MCMD_SPC" uiClass="">
<component label="Temp." locID="MCMP_TEMP" type="NUM" subType="double" values="-40~232" default="85" />
</command>
<command name="SetMODE" label="Set HVAC mode" locID="MCMD_HVACMODE" uiClass="">
<component label="Mode" locID="MCMP_MODE" type="LIST" values="AUTO|HEAT|COOL|OFF" default="AUTO" />
</command>
<command name="SetFAN" label="Set FAN mode" locID="MCMD_FANMODE" uiClass="">
<component label="Mode" locID="MCMP_MODE" type="LIST" values="AUTO|ON" default="AUTO" />
</command>
<command name="MoveSP" label="Change setpoint" locID="MCMD_CHGSP" uiClass="">
<component label="Value" locID="MCMP_VAL" type="LIST" values="UP|DWON" default="UP" />
</command>
</group>
</ModuleCommands>

<ModuleProps>
<group name="HVAC">
<property name="HVACMODE" ops="EQ|NE" type="LIST" values="AUTO|HEAT|COOL|OFF" devchg="true" devstat="true" />
<property name="HVACSTATE" ops="EQ" type="LIST" values="AUTO|HEAT|COOL|OFF" devchg="false" devstat="true" />
<property name="FANMODE" ops="EQ" type="LIST" values="AUTO|ON" devchg="true" devstat="true" />
<property name="FANSTATE" ops="EQ" type="LIST" values="IDLE|RUNNINGLOW|RNNINGHIGH" devchg="false" devstat="true" />
<property name="SPHEAT" ops="LT|LE|GT|GE" type="NUM" subType="double" values="-40~232" devchg="true" devstat="true" />
<property name="SPCOOL" ops="LT|LE|GT|GE" type="NUM" subType="double" values="-40~232" devchg="true" devstat="true" />
<property name="SPSTATUS" ops="EQ" type="LIST" values="NORMAL|HOLD|OVERRIDE" devchg="false" devstat="true" />
<property name="TEMPVAL" ops="LT|LE|GT|GE" type="NUM" subType="double" values="-40~232" devchg="true" devstat="true" />
<property name="TEMPSCALE" ops="EQ" type="LIST" values="F|C" devchg="false" devstat="true" />
</group>
</ModuleProps>

<ModuleFields>
<group name="ZWAVETHERMO">
<address refgrp="ShifraSWaveProtocol" />
<options>
<component label="Temp. Scale" locID="MFLD_TEMP_SCALE" type="LIST" values="F|C" />
<component label="Polling time (sec)" locID="MFLD_POLLSEC" type="NUM" subType="double" values="0~3600" default="10" />
</options>
</group>
</ModuleFields>
</mServerDb>


You will notice that the above is a replica of the Z-wave thermostat but what is different is that i am trying to create my own adapter. The purpose is to attach 2 different Z-WAve controllers on 2 different COM ports. I just want my second one to run a Thermostat.

So the problem is that Adapter Base cannot be defined as anything other than ZWCTRL because that is what it is defined as in EA.Zwave.dll. and If I keep the above as ZWCTRL, the adapter does not launch because each adapter base has to be unique.

So how can I fix this? The only way i see it is make another version of EA.Zwave.dll and rename ZWCTRL to something else. But that would involve de-compiling and re-compiling, which i dont think will work? Any ideas anyone?

Thank you, i really appreciate any help on this one:)